Batching Control
	Four Point Bin Alarm
	Over/Under Checkweigh Control
	Weighing Systems
	Mechanical Conversion Kit
	Heavy Duty Stainless Steel NEMA 4X Enclosure
	NTEP Approved for 10,000 Divisions
	Keyboard Tare Entry
	Four Digital Set Point Outputs with Universal Control Setup
	Multi-point Linearity Compensation
	Tare and Set Points Stored in Nonvolatile RAM
	Full Duplex RS-232 Serial Port
	Easy to Read LED Display
	Displays up to 100,000 Graduations
	Drives up to Eight 350 Load Cells
	Full Front Panel Configuration
	Heavy Duty Swivel Mounting Stand
	Watchdog Circuitry
	RFI/EMI Screened

Load Cell Excitation: +10 VDC
Load Cell Current: Drives up to eight 350Ω load cells
Analog Signal Input Range: 0.2 mV/V min to 3.0 mV/V max
Analog Sensitivity: 0.4 μV/grad (1.0 μV/grad recommended minimum for Legal-for-trade
A/D Conversion Rate: Up to 30 meas/sec
A/D Resolution: Up to 230,000 internal counts
Display: 0.6", 6-Digit LED, Green
Display Resolution: Up to 100,000 external grads, selectable
NIST Classification: H-44 Class III at 10,000 divisions C.O.C.
Key Functions: Zero/Clear, Net/Gross, Tare, Set Point, lb/kg, Start/Stop, Print, Disp Tare, 0-9
Annunciators: Zero, Net, Entered Tare, Gross, Tare, lb, kg, Motion Disp Tare, SPT1-SPT4
Serial Output: Full duplex RS-232 format
Set Point Outputs: Four TTL Level Outputs
Set Point Output Controls: Universal setup allowing auto/manual batch, cycte delay, latched/ unlatched outputs, on/off below activation point, and selectable logic level (High/Low)
Power: 120/240 VAC, 50/60Hz
Operating Temperature: -10ºC to 40ºC (14ºF to 104ºF)
Shipping Weight: 10 lbs (4.5 kg)
Indicator Dimensions: 6.3" x 10.6" x 3.1" (160mm x 270mm x 80mm)
Warranty: 1 year limited warranty